Nortel Phones Flashing
If you’re wondering why your Nortel Phones blinking or some will say Flashing typically this lasts a few minutes and the system activates after loading. . as if they are loading? But, the system does not stop? Flashing but does not come on.
The Nortel
Nortel Phone Blinking
1-888-383-6286
Nortel Support
#nortel #norstar #unitedstates #nortelrepair
A user has reported:
“All my Nortel Phones are flashing and won’t stop. I can not make an outbound or receive an inbound call”
Answer:
There are a few reasons why the Nortel Phones are flashing?
During the loading process of firmware on your Nortel Networks phone system or Norstar Phone System, the phones will often blink. This process can take a few minutes as these systems are older.
However, if the Nortel Phone does not stop flashing, you likely have either a system failure or a firmware failure in this system. So, the first thing you can try is to power cycle your Nortel Phone System. Be aware this is only recommended if you have no other choice as these systems do not like to be powered off. So, unplug the phone system from its main power (outlet) and wait about ten to fifteen minutes before restoring power. The Nortel Phone Should flash again but this time the system should load.
Be aware you are having issues and you should submit a tech support ticket even if the system is restored.
If however, after you’re restored power and the Nortel Phones keep flashing and the phone system does not operate then you need a Nortel Technician to address your system failure.
Nortel Networks Support
Nortel Support
The Nortel Phone System although very user friendly is a very complex phone system that as it ages will require more care then it did when it was newer. Still offer Nortel Support for your office phone system.
You may find other support at Nortelhelpdesk.com
This Nortel Support Article is related to:
Nortel T7316e Phones flashing
Nortel Phone System wont boot
Nortel Phones flashing
Nortel Phones blinking